Solar Power Solution for CCTV & Security Camera Systems
Reliable 24/7 off-grid power for surveillance cameras, routers, wireless bridges and monitoring equipment in remote and outdoor locations.
ZEMU designs the power system around the actual surveillance load rather than applying one generic kit to every project. The engineering scope can include the solar array, battery storage, MPPT controller, protected DC or PoE output, outdoor enclosure, mounting structure and remote monitoring.
A complete design must account for camera night mode, PTZ movement, heaters, infrared illumination, routers, wireless bridges, PoE conversion losses, the lowest-sunlight month and the required number of backup days.
Designed for Remote and Outdoor CCTV Applications
Roadside and Traffic Monitoring
Independent power for fixed cameras, PTZ cameras, wireless bridges and traffic monitoring equipment where trenching is impractical.
Construction Site Security
Rapid-deployment systems for temporary monitoring points that may move as the project develops.
Perimeter and Property Security
Power for remote gates, fence lines, farms, ranches, warehouses and distributed surveillance points.
Farms, Ranches and Remote Properties
Reliable power for cameras, routers and monitoring equipment across distributed rural sites.
Oil, Gas and Mining Sites
Outdoor power packages for CCTV and communications equipment in harsh, isolated operating environments.
Forest and Border Monitoring
Long-duration off-grid power for cameras and data transmission equipment at difficult-to-access sites.
How We Calculate a CCTV Solar Power System
Daily device energy: total equipment power (W) × operating hours (h/day).
Design energy: daily device energy × loss factor.
Nominal battery energy: design energy × autonomy days ÷ usable depth of discharge.
Minimum panel power: design energy ÷ design-month peak-sun hours ÷ solar derating factor.
- Load operates continuously, 24 hours per day.
- 25% allowance for controller, conversion, cable and operating losses.
- Two days of battery autonomy.
- 80% usable depth of discharge for the reference LiFePO4 battery bank.
- Four design-month peak-sun hours and a 0.70 solar derating factor.
- Final sizing must use the actual site location, equipment datasheets and temperature range.
Example Engineered Configurations
These are transparent design references, not universal product promises. Camera peak power, site sunlight, winter temperature and required autonomy may increase the final configuration.
| Reference Application | Continuous Load | Design Energy | Reference Solar Array | Reference Battery | Typical Output |
|---|---|---|---|---|---|
| Single fixed camera | 10W | 300Wh/day | 150W | Approx. 0.75kWh nominal | 12V DC or compatible PoE |
| Camera + 4G router / bridge | 20W | 600Wh/day | 300W | Approx. 1.5kWh nominal | 12V/24V DC or PoE |
| PTZ camera + communications | 40W | 1.2kWh/day | 600W | Approx. 3.0kWh nominal | 24V DC, PoE or project-specific |
| Multi-camera remote node | 80W | 2.4kWh/day | 1.2kW | Approx. 6.0kWh nominal | DC distribution or AC inverter |
Battery Chemistry and Product Model Consistency
| Published Model | Solar Panel | Battery Energy | Standard Battery | Optional Battery | Published Typical Load |
|---|---|---|---|---|---|
| ZM-H30S60-N | 60W | 333Wh | NCM | LiFePO4 (custom configuration) | 5–10W |
| ZM-H40S80-N | 80W | 444Wh | NCM | LiFePO4 (custom configuration) | 8–15W |
| ZM-H50S100-N | 100W | 555Wh | NCM | LiFePO4 (custom configuration) | 10–20W |
The H-series values above reproduce the currently published CCTV Solar Power Kit specifications. “Typical load” must not be interpreted as a guaranteed 24/7 load at every location. Continuous-operation suitability requires the energy calculation and site assumptions shown above.
Published CCTV Project Evidence
Remote CCTV Solar Power System — USA
ZEMU’s published project case documents an outdoor surveillance power system configured for continuous operation without utility power.
- Region
- USA
- Operating Mode
- 24/7
- Solar Panel
- 200W monocrystalline
- Battery
- 12.8V 100Ah LiFePO4
- Controller
- MPPT
- Enclosure
- IP66 outdoor cabinet
- Output
- 12V DC
- Optional Output
- PoE
System Architecture and Engineering Options
Solar and MPPT Charging
Panel voltage and current are matched to the MPPT controller, battery voltage and the site’s lowest design temperature.
Protected Battery Storage
NCM or LiFePO4 is selected by model and application. The quotation states chemistry, nominal energy, BMS limits and temperature options.
DC and PoE Output
Available output may include regulated 12V/24V DC, active IEEE 802.3af/at PoE or a verified passive-PoE configuration.
Outdoor Enclosure
Cabinet protection, cable glands, surge protection, ventilation and condensation control are chosen for the installation environment.
Mounting Structure
Pole- or wall-mounted structures are configured around the panel area, pole diameter, wind exposure and service access.
Remote Monitoring
Optional monitoring can report battery voltage, charging status, load state and alarms for remote maintenance.
Frequently Asked Questions
Can a solar CCTV system provide power 24/7?
Yes, when the panel, battery and output system are sized for the complete daily load, the site’s lowest-sunlight design period and the required autonomy. “24/7” is a design outcome, not a guarantee from panel wattage alone.
How many backup days can the system support?
Backup time depends on usable battery watt-hours and the total daily load. As a simplified check: backup hours = usable battery energy ÷ continuous load. Conversion losses, temperature and BMS limits reduce the real result. ZEMU normally sizes autonomy from the project requirement and local weather risk.
Can the system power PTZ and infrared cameras?
Yes, but sizing must include maximum PTZ movement power, infrared night mode, heaters, wipers and communication equipment. The camera’s average daytime power is not sufficient for final design.
Do all ZEMU CCTV solar systems use LiFePO4 batteries?
Both NCM and LiFePO4 battery options are available. The listed H-series standard models use NCM batteries by default, while LiFePO4 versions can be configured according to project requirements. The final quotation and BOM will specify the exact battery chemistry, nominal voltage, capacity, BMS and charging parameters.
Can the system work in winter or cloudy regions?
Yes, with project-specific derating. The design should use the lowest relevant monthly peak-sun hours, required cloudy-day autonomy and battery charging limits at the minimum site temperature. Heating or thermal management may be required.
Can the system provide PoE output?
Yes. Confirm whether the camera requires active IEEE 802.3af/at PoE or passive PoE, as well as its voltage, pin assignment and maximum power. These requirements determine the converter and protection configuration.
What information is needed for an accurate configuration?
Provide the camera and network-equipment models, maximum power, operating voltage, site location, backup days, temperature range, cable length, mounting method and required output type. This information is used to calculate the solar array, battery, controller and enclosure.
Technical Resources for Project Planning
System Sizing
Installation and Wiring
Integrated Product Models
Get a Project-Specific CCTV Solar Power Configuration
Send the complete equipment load, operating voltage, installation location and required backup days. ZEMU will prepare a configuration based on the actual project assumptions.
Request a System Design