Outdoor network equipment needs a power supply selected for both the connected devices and the installation site. This customer installation in Lithuania shows a ZEMU H50S100-N solar and battery system mounted on a pole in a wooded roadside setting to power network equipment.
The case offers a practical example of solar power for a remote network application. It also illustrates why selecting a remote site power system involves more than choosing a solar-panel wattage: equipment demand, shading, seasonal sunlight and the required battery backup period all need to be considered.

Project Overview
| Item | Confirmed information |
|---|---|
| Country | Lithuania |
| Application | Outdoor network-equipment power |
| Model | ZEMU H50S100-N, HS-N series |
| Solar module | 100 W |
| Battery | 11.1 V, 50 Ah NCM lithium battery |
| Nominal battery energy | 555 Wh |
| Installation | Pole-mounted, in a wooded roadside environment |
The configuration above is based on the archived model specifications and customer-confirmed installation record. Nominal battery energy is not a measured backup-runtime result.
A Pole-Mounted Solar and Battery Installation
The front photograph shows the solar module mounted above the roadside, while the rear view shows the power unit, mounting clamps and connected network equipment. These views document the physical arrangement of the installation rather than a laboratory demonstration.
For a similar project, the mounting design should account for the pole, module orientation, cable routing and access for inspection. The configuration must also match the connected equipment’s electrical requirements. A model used for one network installation should not automatically be treated as suitable for every router, radio or communication device.

Site Conditions Matter for Remote Network Power
Trees are visible around this installation. In a comparable wooded location, the site survey should assess how nearby vegetation could shade the module at different times of day and during different seasons. A photograph alone cannot establish the site’s daily solar yield or confirm year-round energy availability.
Seasonal solar conditions are another design input. The panel and battery should be evaluated against the intended operating schedule and the more demanding periods of the year, rather than sized only around favorable summer conditions.
For the wider design approach, see ZEMU’s solar power solutions for remote sites.
What Does the 555 Wh Battery Rating Mean?
The battery’s nominal energy is calculated from its rated voltage and capacity:
11.1 V × 50 Ah = 555 Wh.
This figure describes nominal stored energy. It is not a guarantee of usable energy at the equipment terminals or a promise of a fixed number of backup hours. Actual runtime depends on the load profile, permitted discharge, conversion losses, temperature and system configuration.
For a new installation, provide the complete equipment list, average and peak demand, daily operating hours and required backup period. Those inputs allow the solar module, battery and output arrangement to be reviewed together. This case does not report measured load, field runtime or uptime results.
Selecting a Configuration for Your Equipment
The H50S100-N belongs to the HS-N product family; in this customer case, its confirmed application is network-equipment power. The application should therefore be described by the customer’s actual use, not inferred from a product-category name.
ZEMU’s HS-N solar power kit product page provides product-family information. Output voltage, connectors, battery options and mounting requirements for a new project should be confirmed against the requested configuration, rather than assumed from this installation.
Frequently Asked Questions
Is a 100 W solar module sufficient for any outdoor network device?
No single module rating is suitable for every load and location. Selection depends on equipment consumption, operating hours, solar conditions, shading and the required backup period. The 100 W rating here describes this case’s configuration, not a universal recommendation.
Does this case demonstrate a specific backup duration?
No measured backup duration is included in the available project record. The confirmed battery rating is 11.1 V, 50 Ah, or 555 Wh nominal energy.
What information is needed for a similar remote site power project?
Provide the equipment models, electrical input requirements, average and peak power, operating schedule, installation location, site photographs and target backup duration.
Discuss Your Remote Network Power Project
This Lithuania installation provides a real-world reference for the physical integration of a solar module, battery power unit and outdoor network equipment. It is not a substitute for site-specific sizing or evidence of a guaranteed runtime.
Planning a similar application? Contact ZEMU with your equipment list and site conditions to discuss a suitable solar and battery configuration.